Samsung Odin 3.14.4 is the latest version of the tool and it is available free for download.
Samsung Odin Flash tool is a Stock ROM/Firmware flashing tool for Samsung Galaxy Smartphones and Tablets running Android operating system. Odin tool helps installing tar.md5 firmware binary files (BL, AP, CP, CSC, HOME CSC, and PIT) using a Windows computer. Although, it is important to note here that unofficial versions are also available for Linux and Mac platforms as well.
The tool was made by the manufacturer, Samsung itself, to be used internally and in its authorized service centers to flash stock firmware on their devices. But thanks to our beloved developers over at XDA (and other kind souls on the internet), who have been kind enough in sharing the updated versions of the Odin Tool with us.
Now that it is on the internet, you can freely download Odin Tool and use it to flash stock firmware on your Samsung Galaxy devices. But, the benefits of using the Odin Flash tool do not stop there. You could do a whole of other things with this powerful tool which we can see in the upcoming sections.
Latest Odin Download for Windows
The official version of Samsung Odin tool is only available for Windows. But fortunately, the unofficial Samsung Odin for Mac and Linux are also available for download.
Odin tool has changed quite a bit since it’s inception but you would not notice any changes on the UI. The changes are all internal for the most part. For example, the latest Odin version, Odin 3.14.4, works well with Samsung latest LZ4 compression method. While Odin v3.13.1, Odin3.13.3 also work fine with this sort of firmware, anything older than that would not work.
Before you proceed to download, find out which odin version right for your Samsung device and firmware version.
Odin 3.14.4 (2021) – Latest Version
Odin 3.14.4 is the latest official version available for Samsung devices. If you are rocking a Samsung Android device that came out in 2020 or later, you would most probably be looking for this version.
However, it is important to note that some devices may require a different version depending on the special needs and requirements. Odin 3.14.4 works really well with the latest UI 2.0 and older versions of One UI (Android 9.0 Pie) as well as Android 8.0 Oreo-based Samsung firmware.
If you own a Galaxy S21, Galaxy S20, Galaxy Note 20, Galaxy Note 10, Galaxy S10, Samsung Note 9, Galaxy A80, A70, A50, M30, or any Galaxy device released in 2019-2020, then this is the version you are most probably looking for.
Modified & Patched Odin
These are the modified and patched versions of the official Odin tool custom made for specific scenarios. These versions made by developers like Raymond, PrinceComsy, and Realbbb.
You will need the modified and patched Odin tool if you want to –
- Flash firmware binaries
- Flash custom recovery .tar.md5
- Skip SHA256 check while flashing
- If you get “FAIL! SHA256 is invalid!” error while flashing using official Odin too.
- Bypass “FAIL! Blocked carrier” error while flashing firmware on Samsung Galaxy devices that are released by carriers such as Verizon, AT&T, T-Mobile, Sprint US Cellular, Rogers, Bell, etc.
Samsung Odin – All Versions
Here, we have listed out all the available versions of the Samsung Odin tool. If you are looking for a specific version, you can get it here.
Below versions are recommended for Android 8.0 Oreo or Android 9.0 Pie-based Samsung firmware:
Below versions of Odin are compatible with Android 6.0 Marshmallow and Android 7.0 Nougat-based firmware. Recommended versions: Odin v312.5, v3.11.2, and v3.10.6.
Odin v3.09 is recommend for Android Lollipop and KitKat firmware:
Below versions are recommended for Android Jellybean firmware:
To flash Android Gingerbread and Ice Cream Sandwich-based Samsung firmware, you should try one of the following versions of the Samsung Odin tool.
Odin for Mac and Linux
As we have noted already, the official version of Samsung Odin tool is only available for Windows platform. While there is no official version of Odin for Mac and Linux, you can use Odin alternatives such as JOdin3 and Heimdall to flash stock Samsung firmware using Mac or Linux platforms.
Download JOdin3 for Linux
If you are on Linux, there is an Odin alternative called JOdin3 CASUAL available for download. The JOdin3 Tool is developed and maintained by developer Toby4213.
How to use:
Note: You need to have Java 8 or later installed on your machine.
- Download the file.
- Extract the file into any directory of your choice.
- Click on the file called JOdin3CASUAL.
Download Heimdall for Mac and Linux (Odin Alternative)
Heimdall is an actively developed and maintained Odin alternative for Linux and Mac. It is one of the most popular Odin alternatives for Mac and Linux available at the moment. You can get the latest version from the official site:
Download Odin for Mac (based on Heimdall)
This is a version of Odin that is custom-made for Mac systems and it is based on Heimdall. This version of Odin requires Java for Mac installed on your machine in order to run.
Though the interface is quite old fashioned you can still use this to flash stock firmware on your Samsung Galaxy phone or tablet.
Do let us know if we have missed any particular version of Odin for Windows, Linux, or Mac.